Gửi tin nhắn
Nhà Tin tức

Three types pulse jet solenoid valve for your reference

Tôi trò chuyện trực tuyến bây giờ
Chứng nhận
Trung Quốc Ningbo Brando Hardware Co., Ltd Chứng chỉ
Trung Quốc Ningbo Brando Hardware Co., Ltd Chứng chỉ
Khách hàng đánh giá
Đẹp nhà cung cấp, đáp ứng tốc độ nhanh, thời gian giao hàng nhanh chóng, sản phẩm chất lượng cao. Tôi may mắn tìm thấy bạn!

—— John Smith

Sự chậm trễ để viết nhận xét đó khi hàng hóa đã nhận cách đây một tuần. Các van điện từ làm việc tốt trên thiết bị của chúng tôi, cảm ơn bạn rất nhiều, bạn bè!

—— Leo Nirva

Dịch vụ là rất tốt, công ty BRANDO là công ty tốt đẹp!

—— Bob Steve

Giúp tôi làm ra sản phẩm khó khăn và cũng là chất lượng là rất tốt, tôi sẽ đặt bạn trật tự mới của tôi sớm.

—— Thành thật mà nói Wellni

Công ty Tin tức
Three types pulse jet solenoid valve for your reference
tin tức mới nhất của công ty về Three types pulse jet solenoid valve for your reference

The pulse solenoid valve is the actuator and key component of the pulse jet cleaning device, which is mainly divided into three types: Right Angle type, Embedded type and In Line type.

 

The right angle pulse valve is characterized in that the valve air inlet and outlet pipe is at a right angle of 90°, so it is called a right angle valve. The diaphragm in the valve of the right-angle pulse solenoid valve divides the pulse valve into two front and rear air chambers. When the compressed air is turned on, the compressed air enters the rear air chamber through the intercepting hole, and the pressure of the rear air chamber brings the diaphragm. Pressurize the output of the valve and the pulse valve is closed.

 

tin tức mới nhất của công ty về Three types pulse jet solenoid valve for your reference  0

 

The submerged pulse solenoid valve uses a mounting method that is submerged in the air bag, so it is called submerged. Compared with other forms, the flow resistance is reduced, the pressure of the blowing air source is lowered, and thus it can be adapted to low pressure, and the energy consumption and the life of the diaphragm can be reduced. The operation principle of the submerged pulse valve is that the diaphragm divides the pulse valve into two chambers, the front and the rear chamber. When the compressed air is turned on, the compressed air enters the rear air chamber through the orifice, and the rear chamber pressure closes the diaphragm to the valve. The output port is off.

 

tin tức mới nhất của công ty về Three types pulse jet solenoid valve for your reference  1

 

The electric signal of the pulse blowing control device moves the armature of the pulse solenoid valve. After the pulse valve, the air outlet of the air chamber opens, the air chamber quickly loses pressure, the diaphragm moves backward, the compressed air is blown through the valve output port, and the pulse valve is opened. . The compressed air is instantaneously ejected from the valve to form a blowing air stream. When the pulse controller's electric signal disappears, the armature is reset, the rear air chamber vent hole is closed, and the rear air chamber pressure is raised to make the diaphragm close to the valve output port, and the pulse valve is closed.

 

We have all of the above these three types pulse jet valves and repair kits, such as diaphragm, solenoid coil, spring and armature.

Focusing on you demand and offering you best solutions is our aim.

 

Echo

Pub Thời gian : 2019-06-25 14:56:57 >> danh mục tin tức
Chi tiết liên lạc
Ningbo Brando Hardware Co., Ltd

Người liên hệ: Mr. Brandon Bao

Tel: 86-13454729544

Fax: 86-574-83879819

Gửi yêu cầu thông tin của bạn trực tiếp cho chúng tôi